TiSBP Fluke Smart Battery Rebuild Service
TiSBP Fluke Smart Battery Rebuild Service is backordered and will ship as soon as it is back in stock.
Charging Recommendations
Charging Recommendations
1. Always ensure that the battery is not hot and is at room temperature before charging.
2. Once charged, remove the battery from the charger. Do not store the battery on the charger for extended periods of time. Please note that storing a battery in a charger that is not plugged into the wall, can potentially cause the battery to drain back into the charger. This was more common with older chargers and we have also noted it in some newer chargers.
3. It is recommended to not store the battery on the device when not in use. Storing the battery separately removes the possibility of the device slowly draining the battery.
4. If you have not used the battery for 2-3 months, we would recommend recharging the battery and if possible, use them. This helps maintain their health.
5. Lastly, be sure to store your battery in a dry environment. If possible, avoid temperatures below freezing and above 110F to maximize battery life.
Shipping
Shipping
Li-Ion batteries may be regulated for shipment based upon their size. Below are links to the regulations from the three main shipping carriers for shipping lithium batteries.
USPS will transport batteries that are up to 100Wh per section 349.222 that can be found here.
UPS will transport batteries that are up to, but not exceeding, 300Wh per their information that can be found here. UPS Hazmat Phone: 1-800-554-9964
FedEx will transport batteries that are up to, but not exceeding, 300Wh per their information that can be found here. FedEx Hazmat Phone: 1-800-463-3339
If your battery is in excess of 300Wh, you will need to see if your local UPS or FedEx location has a staff member that is properly trained to package and ship your battery(s).
Another reference link can be found here. Page 5 references batteries that are being sent for recycling.
DOT Helpline Phone Number: 202-366-4433
PHMSA Information
Sample labels that are used for Li-Ion battery shipments can be found below.
Label 1 Domestic Ground Shipment
Label 2 Domestic Ground Shipment
Label 3 (Only for 300Wh or larger)
TiSBP Fluke Smart Battery Rebuild Service
This is a battery rebuild service!
You must ship YOUR battery to us to be repaired. We DO NOT sell new, used rebuilt, or aftermarket battery packs.
Description
Description
Rebuild service for a Fluke TiSBP smart battery pack. This battery has been discontinued by Fluke and our service requires you to send your battery into us for repair and we will rebuild and send your exact case back to you. We will not swap your case with another so you know you're not getting back a lesser quality. Our rebuild will be done with high-quality cells that will increase the capacity. Please note that the case, circuit board, and connector are customer supplied parts that are not repaired or replaced and therefore carry no guarantee. The case on these will sometimes crack due to the plastic being brittle. If this occurs we will reseal it as best we can. Our company has been repairing Fluke TiSBP batteries for many years and we have one of the best reputations for quality in the battery industry.
Note: This is a rebuild service, and not an attempt to sell a new or aftermarket battery pack. With this service, you must send your battery to us to be repaired.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor do we have access to your credit card information.