BP7440 Fluke® Battery Rebuild Service
BP7440 Fluke® Battery Rebuild Service is backordered and will ship as soon as it is back in stock.
Charging Recommendations
Charging Recommendations
1. Always ensure that the battery is not hot and is at room temperature before charging.
2. Once charged, remove the battery from the charger. Do not store the battery on the charger for extended periods of time. Please note that storing a battery in a charger that is not plugged into the wall, can potentially cause the battery to drain back into the charger. This was more common with older chargers and we have also noted it in some newer chargers.
3. It is recommended to not store the battery on the device when not in use. Storing the battery separately removes the possibility of the device slowly draining the battery.
4. If you have not used the battery for 2-3 months, we would recommend recharging the battery and if possible, use them. This helps maintain their health.
5. Lastly, be sure to store your battery in a dry environment. If possible, avoid temperatures below freezing and above 110F to maximize battery life.
Shipping
Shipping
NiCad & NiMH batteries are dry cell batteries and are not regulated as long as they are protected from becoming shorted during transit. No special packaging or labeling is required.
BP7440 Fluke® Battery Rebuild Service
This is a battery rebuild service!
You must ship YOUR battery to us to be repaired. We DO NOT sell new, used rebuilt, or aftermarket battery packs.
Description
Description
Rebuild Service for a Fluke® BP7440 battery pack. For the cost of this service, we will open the battery pack, replace all cells, and reassemble. Cases, connectors, and circuit boards are re-used and are not replaced or serviced. Send your BP7440 battery into us and let us make it work as good as new. Our trained technicians work on Fluke® brand batteries each day. We rebuild almost all types of Fluke® brand batteries so if you cannot find the one you need please contact us. Don't wait any longer. Send your BP7440 battery pack into us for repair today!
Note: When we are rebuilding your battery, if your circuit board is found to be defective, we will contact you. At that time we will provide you with the option of sending us another battery or we can refund you for the rebuild service. The old cells are removed and recycled prior to circuit board testing and cannot be shipped back to you.
Orders containing lithium batteries will ship by ground only regardless of the shipping method chosen.
Fluke® is a registered trademark. MTO Battery is not affiliated with nor endorsed by Fluke®.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor do we have access to your credit card information.